MF Ceiling Systems Technical Guide
MF ceilings are lightweight suspended ceiling systems designed to support plasterboard linings whilst accommodating services, lighting, ductwork and other building elements within the ceiling void.
Widely used across residential, commercial, education and healthcare projects, MF ceiling systems provide a versatile and cost-effective solution for creating flat, concealed ceilings. The metal frame (MF) system is particularly effective for large spans where a traditional timber or metal stud ceiling would deflect or require excessive hangers.
MF Ceiling Components
MF7 Primary Channel
The main spanning support member suspended from the structure above. Usually spaced at 1200mm centres.
MF5 Ceiling Section
The secondary framing system (furring channel). These clip underneath the MF7 and support the boards, typically at 400mm centres.
MF6A Perimeter Channel
Fixed around the room perimeter to support and restrain the ceiling framework. Provides a clean edge detail.
Angle & Soffit Cleats
Used to suspend and secure the MF ceiling framework to the building structure. Includes MF17 Hanger Angle or MF8/MF9 wire hangers depending on the drop.
MF Ceiling Quantity Estimator
Enter your room dimensions and ceiling drop to obtain accurate material quantities for budgeting.
Frequently Asked Questions
What is an MF ceiling system?
A suspended metal ceiling framework designed to support plasterboard and accommodate services within the ceiling void. It uses a primary (MF7) and secondary (MF5) channel system, rather than a traditional timber or metal stud grid.
Can MF ceilings improve fire performance?
Yes, specific ceiling constructions can contribute toward fire performance requirements depending on the complete system build-up (e.g., using fire-rated boards and specific insulation). Always refer to the manufacturer's fire test data.
Can insulation be fitted above MF ceilings?
Yes. Insulation is commonly installed above suspended ceilings to improve acoustic and thermal performance. It sits within the void created by the hangers.
What is the difference between MF5 and MF7?
MF7 is the heavy-duty primary channel that spans the room and is suspended from the soffit. MF5 is the lighter furring section that clips underneath the MF7 at 400mm centres to carry the plasterboard.
Need help with your MF Ceiling project?
Our experienced team can assist with product selection, material quantities, and project quotations.